StarTech.com EC1000S Especificações descarregar pdf (Página 5)

Instruction Manual

Installation

Hardware Installation

The ExpressCard adapter will simply slide into the ExpressCard slot on any compatible system.

Push the card all the way in, until it ‘clicks’ and locks into place. To eject the card, simply push the

card further into the slot until it clicks, and then release and it will then be automatically ejected

from the slot.

NOTE: Some ExpressCard/54 slots do not rmly hold an ExpressCard/34 card so a 34mm to

54mm stabilizer bracket may be necessary (StarTech.com ID: ECBRACKET).

Connect the Ethernet cable from your router/switch/LAN drop to the RJ45 connector on the

card. The “gigabit” LED should light up when connected at gigabit speeds while the “100” LED

should light up when connected to 100 Mbps speeds. No LED will light up when connected at

10 Mbps speeds.

Driver Installation

Windows 2000/XP/Server 2003

1. When the Found New Hardware wizard appears on the screen, insert the Driver CD into your

CD/DVD drive. If you are prompted to connect to Windows Update, please select the “No, not

this time” option and click Next.

2. Select the option “Install Drivers Automatically (Recommended)” and then click the Next

button.

3. Windows should now start searching for the drivers. Once this has completed, click the Finish

button.

Windows Vista/Server 2008 R2/7

1. When the Found New Hardware window appears on the screen, click on the “Locate and

install drivers software (recommended)” option. If prompted to search online, select the

“Don’t search online” option.

2. When prompted to insert the disc, insert the Driver CD that came with the card, into your CD/

DVD drive and Windows will automatically proceed to search the CD.

3. If a Windows Security dialog window appears, click the “Install this driver software anyway”

option to proceed.

4. Once the driver is installed, click the Close button.

1 2 3 4 5 6 7 8 9

Sem comentários

StarTech.com EC1000S Especificações Página 5