StarTech.com NETRS232_1 Manual de Instruções

Manual Revision: 05/23/2013For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Activating and Deactivating NETRS232 PortsNETRS232 ports that have been detected as existing on the network are not initially activated for your PC. T

There are two icons that depict the state of the NETRS232_x ports and devices:Icon:Device available on the network.Icon with red X:Device not availabl

Advanced SettingsPorts that have been activated on your PC can generally be used without any further conguration. There are, however, additional con

Virtual port (driver) settingsThe virtual port allows a serial port on an NETRS232 device to be used in same manner as a local serial port when the po

To prevent this diculty, NETRS232 Links have a “discovery” mode that allows the correct NETRS232 Link port to be found even when the IP address of th

Binding to IP AddressThe IP address of a network device is assigned by either the system administrator or through a DHCP server. Binding a virtual por

WAN ActivationActivating and accessing the virtual serial port on a NETRS232 device across a WAN can be done in two dierent ways, depending on how th

Instruction Manual144. Ensure that the port(s) to use WAN activation on are congured for “Driver Mode”.5. Record the TCP port number of the port(s)

Instruction Manual15SpecicationsInternet Protocols IP, HTTP, ICMP, TCP, TFTP, and UDPConnectors1 x RJ-45 Ethernet port (female) 1 x DC PowerNETRS232

Instruction Manual16Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-l

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital dev

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you n

Instruction ManualiTable of ContentsIntroduction ...1Packagin

Instruction Manual1IntroductionThank you for purchasing a StarTech.com Ethernet Remote Serial interface converter. With this one, two, or four port co

Serial Rx LEDSerial Tx LEDSerial PortNetwork LEDsRJ-45 PortPower LED DC Power PortInstruction Manual2Hardware Guide

Hardware Installation1. Plug the power adapter into the Power port on the converter and plug the other end into an available power source. The red Po

Conguring the Network SettingsThe IP Extender Manager software displays information in a format similar to Windows Explorer. Any NETRS232 devices on

Conguring Network Settings Using a Web BrowserThe NETRS232 converter contains an embedded web server that allows you to congure your device’s networ

6. Congure the device. The following network and port settings for the device can be congured in a Telnet session:Device settings (for the interfa