StarTech.com S32M2NGFFPEX Manual de Instruções

Manual Revision: 11/03/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual7System Installation PreparationThe S32M2NGFFPEX can be mounted in both low prole and full prole computer systems. Select the bra

Instruction Manual82. Replace the undesired bracket with your desired bracket lining up the mounting holes on the bracket with the bracket h

Instruction Manual94. The Bracket has now been installed.PCI Stando installation (Only required for PCI Slot Installation or if other components are

Instruction Manual104. The S32M2NGFFPEX is now ready for installation into a PCI slot.System Installation1. Open your computer case (refer to the co

Instruction Manual11Hard Drive InitializationIf the M.2 NGFF SSD is new or otherwise blank, it may need to be initialized and formatted before use. F

Instruction Manual12Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Instruction ManualiTable of ContentsIntroduction ... 1System

Instruction Manual1IntroductionSystem Requirements• M.2 NGFF SSD Drive• Computer System with: -Available Low prole or full prole E

Instruction Manual2Product DiagramFront View1. Mounting Bracket (Full prole pictured)Rear View1. M.2 NGFF connector2. SSD Mounting holes3. SSD st

Instruction Manual3M.2 NGFF SSD InstallationWARNING: SSD Drives and storage adapters require careful handling. If you are not careful with your SSD Dr

Instruction Manual42. (Only required if the drive installation screw and stando requires relocating) Remove the nut holding the SSD stando in pl

Instruction Manual54. Using the included Phillips head screw driver. Remove the SSD screw located in the front of the SSD installation stando.5.

Instruction Manual66. Press the drive down toward the SSD stando, and drive the removed screw through the mounting hole on your SSD drive and i