StarTech.com SAT2M2NGFF25 Manual de Instruções

Manual Revision: 09/24/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual7 d) Carefully reseat the main board inside the adapter enclosure.4. Using the included screw driver. Remove the screw locate

Instruction Manual85. Slide the M.2 connector on the SSD into the M.2 receprical connector on the SAT2M2NGFF25.Note: The connector on your M.2 SS

Instruction Manual97. Replace the HDD plate on the bottom of the adapter case, and drive four of the included case screws into the HDD plate mount

Instruction Manual10Hard Drive InitializationIf the M.2 NGFF SSD is new or otherwise blank, it may need to be initialized and formatted before use. F

Instruction Manual11Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Instruction ManualiTable of ContentsIntroduction ... 1Packagi

Instruction Manual1IntroductionPackaging Contents• 1x M.2 NGFF SSD to 2.5” SATA Adapter• 1x SSD mounting kit• 1x Mini Screw driver• 1x Instruction

Instruction Manual2Assembled Adapter ViewAssembled Adapter View1. Top mounting holes2. Side mounting holes3. SATA DATA & Power Combo (7+15 pin)

Instruction Manual3M.2 NGFF SSD InstallationWARNING: SSD Drives and storage adapters require careful handling. If you are not careful with your SSD Dr

Instruction Manual42. Determine if the drive installation bracket requires relocating by assessing your drive length. The board is labeled with th

Instruction Manual5Note: It may require a small prying tool or tweezers to carefully remove the board. b) Remove the nut holding the bracket in plac

Instruction Manual6 c) Reseat the drive installation bracket in the drive installation hole that matches your SSD. Replace the removed n