StarTech.com PEXMSATA3422 Manual de Instruções descarregar pdf (Página 15)

Instruction Manual

WARNING! Capacity mode is a data-destructive process. Please back up all data before

using capacity mode.

Card BIOS Method

1. When prompted on startup, press Ctrl+M to enter the card BIOS utility

Press <Ctrl>+<M> to enter BIOS Setup or <Space> to continue_

2. Using the arrow keys to navigate, move to “HBA0: Marvell 0” and press Enter

to select

3. Press Enter again to open the Conguration Wizard

4. Use the arrow keys to scroll through the list of free physical disks to select the drives

that will be part of the HyperDuo set. Press Space to select/de-select a disk.

NOTE: When a disk is selected, an asterisk (*) appears to the left of the disk label.

5. After selecting the required disks, press Enter to continue.

6. The “Create Virtual Disk” conguration options appear in the “Information” pane

(right-side), here you are able to select HyperDuo or RAID options.

NOTE: The default HyperDuo mode is Safe mode.

7. Highlight “Keep original data” and press Enter to select. Select Yes or No and

press Enter.

WARNING! Selecting “No” will destroy all data on the disks included in the virtual

disk set. Make sure to back up all data before continuing. The “Keep original data”

option is disabled when you choose Capacity mode, as it is inherently data-

destructive.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

Sem comentários

StarTech.com PEXMSATA3422 Manual de Instruções Página 15