StarTech.com R300WN22OP5G Manual de Instruções

Manual Revision: 04/22/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual8Network Mode IP Mode Description Bridged N/ADisables Network Address Translation (NAT) and bridges the Wireless AP and LAN ports t

Instruction Manual97. Once you have congured the Basic Settings, select Security Settings from the left column and choose your desired encryption ty

Instruction Manual104. Select Radio from the left column (Basic Settings) and change the Mode to “Station”, and then click the Save button.5. Click

Instruction Manual117. Once complete, click the Apply button to reboot the AP and put all modied settings into eect.

Instruction Manual12SpecicationsSupported Wireless Standards IEEE802.11 a/nChipset Atheros - AR9344Connectors 2 x RJ45 Ethernet FemaleAntenna Congur

Instruction Manual13Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Instruction Manual1Table of ContentsIntroduction ... 2Packagi

Instruction Manual2IntroductionPackaging Contents• 1 x Outdoor Access Point • 1 x PoE Injector • 1 x Metal Hose Clamp • 1 x Power Adapter • 1 x I

Instruction Manual3Product OverviewRear ViewLED PanelPole/Wall Mount BracketInterface Cover

Instruction Manual4Interface DescriptionReset Button Press continually for 5 ~ 10 seconds to reset the device to factory defaultsLAN 1 Allows LAN conn

Instruction Manual5LED IndicatorsIndicator State Description PWR ON The device is powered onOFF The device is powered oLAN 2ON Link detectedOFF No li

Instruction Manual6Hardware Installation 1. Connect the included power adapter to an available wall outlet and the DC jack on the PoE injector.2. Co

Instruction Manual71. Congure a system to be on the same LAN as the AP (192.168.1.xxx, where xxx is 1 – 254, except 200 ).2. Open a web browser and