StarTech.com PM1115UW Manual de Instruções descarregar pdf (Página 7)

Instruction Manual

LED Indicators

LED State Indication

Status Blinking for POST (Yellow)

When power is connected, the Status

indicator will ash ve times, and then

go solid.

USB On (Green)

LAN Port has a valid network connection

at 100Mbps.

WLAN On (Yellow)

LAN Port has a valid network connection

at 10Mbps.

Reset Button

Reboot the Print Server:

1. Verify the power of print server is turned on.

2. Press the reset button once, and then release it.

Note: This will restart the print server and stop all on-going and pending print jobs.

Print a Self-test Page

1. With the print server powered on and your printer connected and powered, press

the reset button for 8 seconds, and then release it.

2. A test page including the current print server settings will be printed.

Reset to Factory Defaults:

1. Disconnect the power adapter from the print server.

2. Hold down the reset button.

3. Reconnect the power adapter while continuing to hold the reset button for about 5

seconds.

4. Release the reset button.

5. The print server will restart.

WARNING: This will erase all settings on the print server and return it to factory

default.

1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

Sem comentários

StarTech.com PM1115UW Manual de Instruções Página 7