StarTech.com PDU02IP Manual de Instruções descarregar pdf (Página 17)

Instruction Manual

SNMP/SysLog Tab

Congure SNMP Traps and System Logs to be sent to dierent Network Management

Stations (NMS).

System Name: Enter the name of the SNMP device.

System Contact: Enter the name of the System Administrator.

System Location: Enter the location of the SNMP device.

Receiver IP Address: The IP Address of the NMS of where the Traps should be sent.

Receiver Port: The port that will be used to receive the Traps. The default value is 162.

Community: Low-level password of the associated IP address with the access type set

by the administrator.

Enabled: Enables the SNMP Traps to be sent.

SNMP Test: This is used to verify that the Trap notication works properly.

Syslog Server Address: The IP Address of the Server to which the System Logs should

be sent.

Syslog Server Port: The port that will be used to receive the System Logs.

Save: Saves all changes.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 28 29

Sem comentários

StarTech.com PDU02IP Manual de Instruções Página 17