StarTech.com PEX100SFP Manual de Instruções descarregar pdf (Página 5)

Instruction Manual

Installation

WARNING! PCI Express cards, like all computer equipment, can be severely damaged

by static electricity. Be sure that you are properly grounded before opening your

computer case or touching your PCI Express card. StarTech.com recommends that you

wear an anti-static strap when installing any computer component. If an anti-static

strap is unavailable, discharge yourself of any static electricity build-up by touching a

large grounded metal surface (such as the computer case) for several seconds. Also be

careful to handle the PCI Express card by its edges and not the gold connectors.

Hardware Installation

1. Turn OFF the computer power before installation.

2. Unplug the power cable from the rear of the power supply on the back of the

computer and disconnect all peripheral devices.

3. Remove the chassis cover from your computer.

4. Locate an unused PCI Express slot and remove the corresponding slot cover from

the rear panel of the computer chassis. Retain the screw (if applicable) used to hold

the slot cover in place.

5. Align the PCI Express card with the unused PCI Express expansion slot. Applying

pressure evenly across the top edge of the expansion card, rmly but gently insert the

card into the slot, ensuring that the card is properly aligned with the rear panel slot.

6. Secure the card to the motherboard and rear chassis using the screw removed in

step 4 (if necessary). Secure the additional serial port provided by the daughter

board (smaller circuit board to an adjacent rear bracket.

7. Replace the chassis cover (removed in step 3).

8. Plug power cable back on the rear of the power supply and power ON the computer.

Once the computer has been rebooted, the operating system will detect that the

PCI Express card has been installed and request driver installation, detailed in the

next section.

1 2 3 4 5 6 7 8 9 10

Sem comentários

StarTech.com PEX100SFP Manual de Instruções Página 5