StarTech.com SV231USBAN Manual de Instruções descarregar pdf (Página 10)

Instruction Manual

Installation

To set up your SV231USBAN/SV431USBAN KVM Switch, refer to the

installation diagram on the following page, which corresponds with the

following steps:

Plug your keyboard, mouse and monitor into the Console Ports located 1.

on the unit’s rear panel.

Plug your microphone and speakers into the Console microphone and 2.

speaker jacks located on the unit’s rear panel.

Using a KVM cable set (included), plug the custom SPHD connector 3.

into any available CPU Port on the KVM switch. Plug the

accompanying microphone and speaker connectors into the

corresponding audio ports for that CPU Port.

At the other end of the KVM cable, plug the USB keyboard/mouse, 4.

USB hub, video, microphone and speaker cables into their respective

ports on the computer.

Use CAT5 cable to connect an available Ethernet port on the KVM 5.

switch to the computer’s Ethernet port. Repeat steps 3-5 for any other

computer you are connecting to the KVM switch.

Plug the cable from your external LAN source into any available 6.

Ethernet port on the switch.

Plug the power adapter that came with the KVM switch, into an AC 7.

power source, then plug the power adapter’s DC plug into the KVM

switches DC jack.

Plug your USB peripherals into the USB hub section on the front 8.

panel.

Warning! Make sure that power to all of the devices you will be con-

necting to the KVM switch, has been turned off.”

Please Note:

A. The audio connectors and jacks are color coded and marked with an

appropriate icon for easy installation.

B. Be sure that the audio connectors on the KVM cable set are plugged

into the same CPU Port number on the KVM switch.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Sem comentários

StarTech.com SV231USBAN Manual de Instruções Página 10